Mifi 2372: Generic firmware vs. AT&T firmware: SLOWER d/l speed with gen. (in the US)

[flymooney]

At my location, the ATT firmware was giving me 4Mbits d/l speed, as opposed to about 1.2 Mbits with the generic firmware. Just a coincidence? I don't know.

Anyone with similar observation?

flymooney

P.S: Mifi 2372 with generic f/w 5.26.2 versus AT&T f/w 7.11.02 (from the Novatel Wireless website)

[shane0917]

At my location, the ATT firmware was giving me 4Mbits d/l speed, as opposed to about 1.2 Mbits with the generic firmware. Just a coincidence? I don't know.

Anyone with similar observation?

flymooney

P.S: Mifi 2372 with generic f/w 5.26.2 versus AT&T f/w 7.11.02 (from the Novatel Wireless website)

I tried to upgrade mine and lost it. Was going to upgrade it so I could monitor the battery life and signal with my ipad. I'm also a pilot and wanted to be able to use the gps features so I could track the map when flying. Now my mifi if trashed. Can you send me the generic so I can get this running again?

[shane0917]

http://www.nvtl.com/index.php?option=com_content&view=article&id=296&Itemid=49

[flymooney]

1- That's the link for the up to date ATT firmware. It does have the GPS software and moving maps (google maps). My device with the generic software did not have GPS. I reverted back to ATT for that reason and speed concerns. ( for flying I use my Quartz gps)

2- PM me for the generic firmware.

flymooney

[shane0917]

Mooney I'm having issues with getting my firmware reflashed. When I try to use the Novatel software I get some kind of error when I try to go back to the ATT software. I think I accidently flashed with that bell software and now I cant go back. Do you have any tips on that?

[flymooney]

Shane, check your PM.

Please note I was not able to reflash the Mifi with AT&T firmware after loading the Bell firmware. It was giving me a "unknown string" error. I am not sure if it is possible to reflash the ATT firmware from a working unlocked generic firmware.

IMHO, the AT&T firmware is better than the generic. It seems to connect faster (with ATT), d/l speed seems faster, and it has GPS with google maps, and DNLA server.

For roaming in Canada, I use un unlocked Sierra Wireless 306.








Mooney I'm having issues with getting my firmware reflashed. When I try to use the Novatel software I get some kind of error when I try to go back to the ATT software. I think I accidently flashed with that bell software and now I cant go back. Do you have any tips on that?

[madhorse]

How to flash the AT&T firmware back if u get invalid string:

run the 20419181_MUU_MSM7225_Arches.ATT_AMSS_7.11.02_Linux _2.7.0207_2010-02-10_pkg.exe

when u get the error message go to:
c:\windows\temp\MUU
Copy all the files from there in a different directory.
Press ok and the app will close and all the files from MUU will be deleted
Copy back all files in MUU directory
Open the file:
20419181_MUU_MSM7225_Arches.ATT_AMSS_7.11.02_Linux _2.7.0207_2010-02-10.xml
Search for:

<Description>Update Sys_def_Config File</Description>
<NVItem ShowInWizard="YES">
<NV_Name ConfigRef="YES">Update Sys_def</NV_Name>
<WizardText LANGID="0x0409">0. Update config file Profiles</WizardText>
<Note>Upgrade firmware</Note>
</NVItem>

Delete this part. Save the file.
Now run the MUU.exe from same directory.
I will start writing the firmware and it will stop again later on with a different error.
Run again the Muu.exe file
(you need to repeat this 3 times as is need to write correct all 3 partitions).

Now u'll get error on writing the updated config files.
Now just run the original flash updater.
The Error string will not be there anymore and it will flash correctly.
Enjoy ;)

P.S.
If you flash to a european version it kinda ****s up the tunings for the 3g
SO...
From generic firmware copy the:
umts_pst_lib.nvi_db and flash it
Enjoy a nice mifi.
P.S.
I flashed like so on my 2352 vodafone mifi and is working fine
Enjoy.
Say thanks if u enjoyed it ;)

[sumtingwong]

You're da bomb! Thanks a bunch!! I used your instruction and was able to flash the AT&T firmware onto my generic Mifi. The AT&T firmware did not recognize my microSD card for some reasons and thus I don't have the new DLNA feature. Was wondering if anybody having the same issue. I tried a bunch of different cards but still no luck. When I reflash the v5.26.2 firmware, the Mifi device can see my microSD card. :( I still keep the AT&T v7.11.02 firmware though as I can't think of a way to use the microSD card with the old v5.26.2 firmware any way.

Also, my device remained unlocked with the AT&T firmware. I was able to put in a (prepaid) TMobile SIM and got online with it.

http://www.dc-unlocker.com/forum/attachment.php?attachmentid=273&d=1318521470

How to flash the AT&T firmware back if u get invalid string:

run the 20419181_MUU_MSM7225_Arches.ATT_AMSS_7.11.02_Linux _2.7.0207_2010-02-10_pkg.exe

when u get the error message go to:
c:\windows\temp\MUU
Copy all the files from there in a different directory.
Press ok and the app will close and all the files from MUU will be deleted
Copy back all files in MUU directory
Open the file:
20419181_MUU_MSM7225_Arches.ATT_AMSS_7.11.02_Linux _2.7.0207_2010-02-10.xml
Search for:

<Description>Update Sys_def_Config File</Description>
<NVItem ShowInWizard="YES">
<NV_Name ConfigRef="YES">Update Sys_def</NV_Name>
<WizardText LANGID="0x0409">0. Update config file Profiles</WizardText>
<Note>Upgrade firmware</Note>
</NVItem>

Delete this part. Save the file.
Now run the MUU.exe from same directory.
I will start writing the firmware and it will stop again later on with a different error.
Run again the Muu.exe file
(you need to repeat this 3 times as is need to write correct all 3 partitions).

Now u'll get error on writing the updated config files.
Now just run the original flash updater.
The Error string will not be there anymore and it will flash correctly.
Enjoy ;)

P.S.
If you flash to a european version it kinda ****s up the tunings for the 3g
SO...
From generic firmware copy the:
umts_pst_lib.nvi_db and flash it
Enjoy a nice mifi.
P.S.
I flashed like so on my 2352 vodafone mifi and is working fine
Enjoy.
Say thanks if u enjoyed it ;)

[ChesterGSD]

I tried the procedure below to flash the AT&T Firmware. Everything went well, however, now I have problems with the MiFi randomly disconnecting the WIFI side (can connect to it). It happens much quicker when I try to use the GPS using the iPad maps.

Anyone seeing the same problem ?

Thanks

[ben7230]

Hi, I followed the instructions and everything works great except for the sms. I cant view or create new messages. I need this to activate my internet on my prepaid sim. is there a sevice number some were that i need to change to wok on a different carrier than att?

[varkey]

@madhorse - Thanks for the instructions, worked perfectly

I was on the Bell 5.28 firmware.