Help to unlock Huawei E970

[manga]

Does anyone have detailed instructions in how to unlock a huawei E970 router.
The DC-unlocker only show com ports, but the router connects on LAN and USB for power suply.

[Vincentas]

Unlocking instructions are the same as for all modems. More about unlocking you can watch here: http://www.dc-unlocker.com/tutorials
In dc unlocker software select manufacturer huawei an model leave autodetect. Then will not need to select any ports. Connect router with usb cable, close all programs that may take control on this modem and then try to detect.

[manga]

the DC-unlocker software will not detect my router, i have seen the tutorial.
There are no program for the router, only a browser interface if i connect the LAN port. The USB port is connected to a powersuply, i have tried to connect the routers USB port with a regular USB cable to my PC, and the PC detects the router, but DC-unlocker does not. I appreciate your help.

[Arunas]

Install drivers for this router and will detect, here many users is unlocked.

[wildjoker]

Unlocking instructions are the same as for all modems. More about unlocking you can watch here: http://www.dc-unlocker.com/tutorials
In dc unlocker software select manufacturer huawei an model leave autodetect. Then will not need to select any ports. Connect router with usb cable, close all programs that may take control on this modem and then try to detect.
Seems this router can't be connected via USB to PC. How can connect it??
The USB port is for Power supply
Help please. I just buy dc unlocker today for unlock a big qty os these routes because in web page says is supported,

[Arunas]

Please try another usb cable. Maybe supplied cable is for power only ?

[manga]

Yes the supplied USB cable is for power only, it is connected to a transformer, so i am using another USB cable.
I can not find any drivers for the router to install on my PC, do you have a tread ?
Thanks

[wildjoker]

Yes the supplied USB cable is for power only, it is connected to a transformer, so i am using another USB cable.
I can not find any drivers for the router to install on my PC, do you have a tread ?
Thanks
Your PC detect router when is plugged to USB??? I try in 3 PCs and nothing happens. Five minutes ago I dismantelate the router and solder 4 wires to USB cable, and pluged to charger too
and the same. Is like connect nothing!!!!
Any help please???
My costumer is ungry

[Arunas]

Drivers is in DC-unlocker installer, check folder where installed it. This router have standard usb connector, same as printers scanners and many other devices.

[wildjoker]

Drivers is in DC-unlocker installer, check folder where installed it. This router have standard usb connector, same as printers scanners and many other devices.
Yes, but this USB connector is for power only. Any real help???

[Arunas]

From user manual :
Using E970 gateway in USB modem mode
In order to use E970 gateway as USB modem, the following steps should be done:
a) Connect E970 gateway with your computer via USB cable. Please note that B970 as USB modem works on
Windows OS (2000, XP, Vista).
b) Setup wizard of „Mobile Partner“ software should start automatically. If
software setup wizard does not start automatically go to „My Computer“ and
double-click on „Mobile Partner“ disk. Install „Mobile Partner“ software.

Please search user manual, and read for more details if needed.

[manga]

From user manual :
Using E970 gateway in USB modem mode
In order to use E970 gateway as USB modem, the following steps should be done:
a) Connect E970 gateway with your computer via USB cable. Please note that B970 as USB modem works on
Windows OS (2000, XP, Vista).
b) Setup wizard of „Mobile Partner“ software should start automatically. If
software setup wizard does not start automatically go to „My Computer“ and
double-click on „Mobile Partner“ disk. Install „Mobile Partner“ software.

Please search user manual, and read for more details if needed.
I don't have the „Mobile Partner“ software, i have tried to get it from Huawei but i can't fint it on their webpage. Could you give me a link please ?

[Vincentas]

You can find mobile partner software here: http://www.dc-unlocker.com/downloads/open/32

[manga]

You can find mobile partner software here: http://www.dc-unlocker.com/downloads/open/32
Thanks, i have the mobile partner now and it detects the E970 router, but when i try to detect with DC-unlocker i get this message.
Detecting card: Diagnostic port not found.

[Arunas]

Please double check drivers and close mobile partner.

[manga]

Please double check drivers and close mobile partner.
Thanks now it works, this time i got the message :
Detecting card :

Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020488064
Firmware : 256.11.00.11.110
Serial NR. : KQ7NAB18A2100945
SIM Lock status : unlocked

I think i misunderstand what the DC-unlocker does, it unlocks simcards, it does not unlock the firmware, so my router is still locked to T-mobile firmware.
I can not find new firmware for my router B970, do you have a link ?
Or do you know how to unlock the firmware, i allready bought 25 credit that i can not use.
Huawei is not as supportive as you have been.

[Vincentas]

Was there a sim card inserted whrn you were detecting this router? Dc-unlocker unlocks the modem/router and it accepts all provider sim card.
Sorry, we do not have formware for this router.

[manga]

Was there a sim card inserted whrn you were detecting this router? Dc-unlocker unlocks the modem/router and it accepts all provider sim card.
Sorry, we do not have formware for this router.
Yes there was a sim card inserted when i was detecting the router. When the router is connected with the USB cable it works as a modem and it is not locked, but when i connect it as a router with a LAN cable it will not connect, the installed software will not let me change the dialing number.

[Vincentas]

You should try detecting the reouter without sim card inserted. Then you will see the real lock status.

[abcrino50]

i think my problem in usb cable but i try many cable and other pc but not help and i downloaded mobile partner also not help any advice:confused:

[Ghanim_Q8]

i think my problem in usb cable but i try many cable and other pc but not help and i downloaded mobile partner also not help any advice:confused:

try to turn mobile partner off

then choice Auto Detedct

it should be detected now

and also you suppose to have internet connetion to unlock the Router later

or if Dc unlocker not detect it at all try to unlock it with other PC

best reqards

ghanim

[miraclezdohappen]

I have a B970 ... DC-Unlocker shows sim lock status as UNLOCKED

But when I use a different SIM in router mode, the inbuilt router firmware shows "No Sim or Invalid Sim"

Will DC-unlocker help to bypass this restriction ??

If Yes, I will buy 25 credits right away :D

PS: I have searched all over the internet, and I coudnt find a solution to hack firmware of B970/E970 ..... Anybody has any clues ???

[Ghanim_Q8]

I have a B970 ... DC-Unlocker shows sim lock status as UNLOCKED

But when I use a different SIM in router mode, the inbuilt router firmware shows "No Sim or Invalid Sim"

Will DC-unlocker help to bypass this restriction ??

If Yes, I will buy 25 credits right away :D

PS: I have searched all over the internet, and I coudnt find a solution to hack firmware of B970/E970 ..... Anybody has any clues ???

hi sir

but sim card not worked with youre router and detect it with Dc unlocker it should give you locked

if it show no sim or invalid sim it mean youre Router is lock by a one network

if you want to used it with other networks

you suppose to unlock it

and that can by Dc unlocker

by 25 credet and unlock it

enjoy to used youre 970 with all networks

thats what i now wait the dc supporter and see

best reqards

ghanim

[Vincentas]

If dc unlocker shows lock status unlocked, means it is unlocked. It may not acccept other sim cards, because the firmware is customized. You need to rewrite the firmware.

[miraclezdohappen]

If dc unlocker shows lock status unlocked, means it is unlocked. It may not acccept other sim cards, because the firmware is customized. You need to rewrite the firmware.
Yes Sir, you are right... The SIM is unlocked, but it is locked in the firmware.

Do you offer firmware unlock service ??? If yes, how much credit is it ?

[miraclezdohappen]

I just noticed something else weird... The SIM Lock/Unlock keeps changing each time.. I tried with and without SIM, same result... Sometimes the Serial NR. also changes, but the IMEI number remains the same... So I really do not know which status to believe.. That the router is locked or unlocked ?? :(

I contacted Web Customer Care, and the girl there told me that if I cannot unlock it, I get a refund... So I am going to go ahead and try today.. :o

Any last moment suggestions from all the tech geeks here :D ???

See below for information ....

======

Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020313585
Firmware : 256.11.00.13.112
Dashboard version : UTPS11.002.03.21.03
Serial NR. : KQ7NAB18C0502404
SIM Lock status : unlocked



Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020313585
Firmware : 256.11.00.13.112
Dashboard version : UTPS11.002.03.21.03
Serial NR. : KQ7NAB18C0502404
SIM Lock status : Locked (Card Lock)



Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020313585
Firmware : 256.11.00.13.112
Dashboard version : UTPS11.002.03.02.397_MAC11.202.08.01.397
Serial NR. : DJ7NAC18C0205004
SIM Lock status : Locked (Card Lock)

=========

[Avantha]

I just noticed something else weird... The SIM Lock/Unlock keeps changing each time.. I tried with and without SIM, same result... Sometimes the Serial NR. also changes, but the IMEI number remains the same... So I really do not know which status to believe.. That the router is locked or unlocked ?? :(

I contacted Web Customer Care, and the girl there told me that if I cannot unlock it, I get a refund... So I am going to go ahead and try today.. :o

Any last moment suggestions from all the tech geeks here :D ???

See below for information ....

======

Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020313585
Firmware : 256.11.00.13.112
Dashboard version : UTPS11.002.03.21.03
Serial NR. : KQ7NAB18C0502404
SIM Lock status : unlocked



Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020313585
Firmware : 256.11.00.13.112
Dashboard version : UTPS11.002.03.21.03
Serial NR. : KQ7NAB18C0502404
SIM Lock status : Locked (Card Lock)



Found modem : B970
Model : Huawei B970/E970
IMEI : 352335020313585
Firmware : 256.11.00.13.112
Dashboard version : UTPS11.002.03.02.397_MAC11.202.08.01.397
Serial NR. : DJ7NAC18C0205004
SIM Lock status : Locked (Card Lock)

=========


Do you think that i'm a girl? :D Anyway no problem.Try to unlock your modem.We will check before refund wether you unlocked it or not.

[miraclezdohappen]

DC-unlocker rockzzzzzzzzzzzzzzzz :D

After multiple attempts, I finally manager to re-create the situation where the status showed as SIM: Locked (Network)

After that, I clicked UNLOCK, and hurray, in hardly 10 seconds it said UNLOCKED SUCCESSFULLY....

I was a little hesitant at first thinking I just lost 25 Euros, but yippee ya ye, a new SIM went straight inside the firmware without any warning...

So, I guess it was not a firmware lock issue, it was just that the DC-unlocker had a little glitch that did not show the correct lock status (most of the time, it showed as unlocked)..

For anyone out there still trying like me, let me tell you how I did it...

At first I tried without a SIM inside like the tutorials said, it din't work. It finally worked only when I put a disabled SIM inside, and also opened mobile partner at the same time. As soon as it said INVALID SIM, close mobile partner and run DC-unlocker :D

And Avantha, thanks for the confidence you gave me on chat that you will refund in case I was not able to unlock it. It was your confidence that made me buy the credits :D

Great Customer Support :)

[Avantha]

Nice to hear that.Thank you.

[juadapa]

DC-unlocker rockzzzzzzzzzzzzzzzz :D

After multiple attempts, I finally manager to re-create the situation where the status showed as SIM: Locked (Network)

After that, I clicked UNLOCK, and hurray, in hardly 10 seconds it said UNLOCKED SUCCESSFULLY....

I was a little hesitant at first thinking I just lost 25 Euros, but yippee ya ye, a new SIM went straight inside the firmware without any warning...

So, I guess it was not a firmware lock issue, it was just that the DC-unlocker had a little glitch that did not show the correct lock status (most of the time, it showed as unlocked)..

For anyone out there still trying like me, let me tell you how I did it...

At first I tried without a SIM inside like the tutorials said, it din't work. It finally worked only when I put a disabled SIM inside, and also opened mobile partner at the same time. As soon as it said INVALID SIM, close mobile partner and run DC-unlocker :D

And Avantha, thanks for the confidence you gave me on chat that you will refund in case I was not able to unlock it. It was your confidence that made me buy the credits :D

Great Customer Support :)

I had the same problem, but after read your post I got unlock my B970 router, thanks a lot for your information.

kind regards from Spain!

[miraclezdohappen]

I had the same problem, but after read your post I got unlock my B970 router, thanks a lot for your information.

kind regards from Spain!
So Avantha will give me a discount on my next purchase :D ????

[Avantha]

So Avantha will give me a discount on my next purchase :D ????

Buy a DC-Unlocker dongle.Then lot of modems free and unlimited.....:)

[fonec]

thanks for best post

[oldphones]

DC-unlocker rockzzzzzzzzzzzzzzzz :D

After multiple attempts, I finally manager to re-create the situation where the status showed as SIM: Locked (Network)

After that, I clicked UNLOCK, and hurray, in hardly 10 seconds it said UNLOCKED SUCCESSFULLY....

I was a little hesitant at first thinking I just lost 25 Euros, but yippee ya ye, a new SIM went straight inside the firmware without any warning...

So, I guess it was not a firmware lock issue, it was just that the DC-unlocker had a little glitch that did not show the correct lock status (most of the time, it showed as unlocked)..

For anyone out there still trying like me, let me tell you how I did it...

At first I tried without a SIM inside like the tutorials said, it din't work. It finally worked only when I put a disabled SIM inside, and also opened mobile partner at the same time. As soon as it said INVALID SIM, close mobile partner and run DC-unlocker :D

And Avantha, thanks for the confidence you gave me on chat that you will refund in case I was not able to unlock it. It was your confidence that made me buy the credits :D

Great Customer Support :)

Witch version of dc-unlock did you use ? can you please post a link ?

[diegotl]

I don't have the „Mobile Partner“ software, i have tried to get it from Huawei but i can't fint it on their webpage. Could you give me a link please ?

Hi
Hello
I have a router Huawei B970, I connect with USB cable and install the drivers.
but in seeking to detect the DC unloker always get this message

DC - Unlocker 2 Client 1.00.0557

Detecting card:

selection:
manufacturer - Huawei modems
model - Auto detect (recommended)

card not found!

Help me please

[Vincentas]

Hi
Hello
I have a router Huawei B970, I connect with USB cable and install the drivers.
but in seeking to detect the DC unloker always get this message

DC - Unlocker 2 Client 1.00.0557

Detecting card:

selection:
manufacturer - Huawei modems
model - Auto detect (recommended)

card not found!

Help me please

f you can not detect modem you should check the fallowing:
Check, if the drivers are installed
Check, if the connection software for this modem is closed and modem is not connected to internet
Check, if you use autodetect function in dc-unlocker software
Check, if you use latest dc-unlocker software version.

Also try to connect router by LAN cable and detect then.

[diegotl]

Hi

Now my router is unlocked, thanks for your assistance.
Now I have another problem and I need your help
I can only connect as a modem with a USB cable.
When used as a router fails to connect, but shows that the signal is good.
Another detail to note is that only connect on EDGE, HSDPA never take me.
When I put the SIM Card on your orignal mobile device immediately connects HSDPA mode.
I tried with 2 different SIM'S providers and the same thing happened.
Please help me

[reyni]

Hi, i just bought and unlocked my B970, it works fine with the usb cable but... what do i have to do in order to conect by wifi? do i have to conect a internet cable on it, access with a web browser and change the internal configuration? if so what if the ip, login and pass?

thanks