Error connecting to server !

[musicman]

since yesterday (as i updated dc-unlocker from an older version) i have this error message. (error code 62) I have a Dongle for DC-Unlocker.
On another computer dc-unlocker writes "detecting monitor software" with this new dc-unlocker-version. I don´t know witch software, and i haven´t installed new software last time.

regards

Erich

[Vincentas]

Could you write your dongle serial number? Then I will check, why you may receive this error.

[boulouris]

I have the same problem..when I ask DC-Unlocker to do-the job generate unlocking code) it shows me this message : "detecting monitor software"

My model and imei are :

Found modem : K3565
Model : Vodafone K3565
IMEI : 354765036505758
Serial NR. : DY4CAA19B0504440
Firmware : 11.608.11.00.287
Compile date / time : Jul 09 2009 20:40:35
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Chipset : Qualcomm MSM6246
NAND Flash : samsung_K5D1G13ACH
Voice feature : enabled
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

[musicman]

I have the same problem..when I ask DC-Unlocker to do-the job generate unlocking code) it shows me this message : "detecting monitor software"

I don´t know wich software this is. It can be some network monitoring software uses winpcap driver. I have not installed this and don´t found this driver on my computer. I have uninstalled netmeter (and network stumbler), but i don´t know if this is the software making the problems. Vincentas unblocked me on the server and i use now an older version of DC-Unlocker (528) to avoid this problem. I have a lot of E220 to unlock, so today i don´t need a newer version.

[Vincentas]

I have the same problem..when I ask DC-Unlocker to do-the job generate unlocking code) it shows me this message : "detecting monitor software"

My model and imei are :

Found modem : K3565
Model : Vodafone K3565
IMEI : 354765036505758
Serial NR. : DY4CAA19B0504440
Firmware : 11.608.11.00.287
Compile date / time : Jul 09 2009 20:40:35
Dashboard version : UTPS11.300.05.15.143_MAC11.301.09.01.143
Chipset : Qualcomm MSM6246
NAND Flash : samsung_K5D1G13ACH
Voice feature : enabled
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server.

[faruk]

when i want to unlock INQ Chat 3G it says ''error connecting to server'' after i put in my account details. It worked 5 minutes ago :(

[Vincentas]

when i want to unlock INQ Chat 3G it says ''error connecting to server'' after i put in my account details. It worked 5 minutes ago :(

Could you write your username? I will check, why you may receive this error.

[faruk]

Could you write your username? I will check, why you may receive this error.

My username is faruk

[Vincentas]

My username is faruk

Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server.

[faruk]

Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server. How can i see where my network scanner software is? i deleted the Winpcap in the Add or Remove programs

[Vincentas]

How can i see where my network scanner software is? i deleted the Winpcap in the Add or Remove programs

WinPcap is used as the network interface by many tools -- both free and commercial including protocol analyzers, network monitors, network intrusion detection systems, sniffers, traffic generators, network testers, etc. Some of these tools, like Wireshark, Nmap, Snort, WinDump, ntop are very well known in the networking community.

The driver can be started or stopped from Services in the Control Panel or by other programs. The program has no visible window. The service has no detailed description. The file is not a Windows core file. There is no file information. Program is not active.

[elektronics]

I have the same problem..
After Check logi only info:
Error connecting to server !
My dongle ID 00018883 Vygis dongle user
Best Regards
elektron

[Vincentas]

I have the same problem..
After Check logi only info:
Error connecting to server !
My dongle ID 00018883 Vygis dongle user
Best Regards
elektron

Here is no block and all servers are working,
You should check, if the firewall or other software is not blocking the connection. Check, if you have internet conenction at unlock time. Try to use other connection type or other computer.

[sarah_dermoid]

I have this problem too. I am using Norton anti-virus softwares. Should I uninstall it?
Thank you!

[elektronics]

Here is no block and all servers are working,
You should check, if the firewall or other software is not blocking the connection. Check, if you have internet conenction at unlock time. Try to use other connection type or other computer.

I instal software again in other computer. Firewale off, virus software off still not work:

Model : ZTE F107
IMEI : 358048031577130
Firmware : H3G_GB_P607C5V1.0.0B11-S
Compile date / time : Jun 17 2010 15:58:03
Chipset : Qualcomm QSC6240
User Lock Code : 0000

================================================== =================

Unlocking, please wait ...


Error connecting to server !

(error code 62)

[elektronics]

Aftera run dc unlocker Dongle user and count empty.
Vincentas i need help.

Best Regards

[Vincentas]

I have this problem too. I am using Norton anti-virus softwares. Should I uninstall it?
Thank you!

Could you write your username or dongle serial number? Then I would check why you may receive this error.

[Vincentas]

I instal software again in other computer. Firewale off, virus software off still not work:

Model : ZTE F107
IMEI : 358048031577130
Firmware : H3G_GB_P607C5V1.0.0B11-S
Compile date / time : Jun 17 2010 15:58:03
Chipset : Qualcomm QSC6240
User Lock Code : 0000

================================================== =================

Unlocking, please wait ...


Error connecting to server !

(error code 62)

Could you try to disconnect your dongle, start dc-unlocker software, enter any username and press check login for one time? What error do you receive? What username did you use?

[elektronics]

Thank You Arunas. Problem solved. Dc-unlocker serwer blocked my IP.
Best Regards

[rash.m2k]

I am also getting the same server not found error.

I had pcap installed, but it is now removed and uninstalled.

My username is rashm2k.

Thanks.

[rash.m2k]

I am also getting the same server not found error.

I had pcap installed, but it is now removed and uninstalled.

My username is rashm2k.

Thanks.

I have tried this on my laptop as well and get the same error!!!!!!!!

[Vincentas]

I have tried this on my laptop as well and get the same error!!!!!!!!


Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server.

[nasir iqbal]

me to have same problam

Unlocking, please wait ...


Error connecting to server !

(error code 62)
:confused:

[Vincentas]

me to have same problam

Unlocking, please wait ...


Error connecting to server !

(error code 62)
:confused:

Could you write your username or dongle serial number, then I would check, why you may receive this error.

[nasir iqbal]

thx for reply.. hare is my dongle serial no :09730A9B plz have to check i brougt it just few days a go:confused:

[nasir iqbal]

thanksssss a lot ..... problam is solved:);):D

[andrealecio]

Dear,

I was trying to unlock my ZTE modem and was getting mf110 msg monitoring program. I did not know the meaning, and after that I can not do more login. When reading the forum I saw that the problem was the winpcap. I removed it but am still unable to connect.

[andrealecio]

My username is andrealecio.

[andrealecio]

Thanks.

Unlocked OK! \o/

[Vincentas]

My username is andrealecio.

Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server.

[andrealecio]

Dear,

OK!

I already got.
:)

[oscar]

My dongle ID 000255D6


access denied !

================================================== =================

access denied !

================================================== =================

access denied !

==========================

[Vincentas]

My dongle ID 000255D6


access denied !

================================================== =================

access denied !

================================================== =================

access denied !

==========================

Could you try to do these steps: disconnect dongle, start dc-unlocker, enter any username and password 12345 and press check login. What error do you receive? What username did you use?

[oscar]

user name vygis dongle user

password Do not know



Vdisconnect dongle Wrong username or password !

================================================== ========

[oscar]

Could you try to do these steps: disconnect dongle, start dc-unlocker, enter any username and password 12345 and press check login. What error do you receive? What username did you use?



Please help me
disconnect dongle to enter a user name and password
Is the following error
Wrong username or password!

My box is VYGIS DONGLE USER

[afrik]

Vincentas,

Followed your instructions,

Got message : Wrong username or password !

Made up user name is : arsenal
Password :sharp55555

My modem details if of help is below
Found modem : MF112
Model : ZTE MF112
IMEI : 864592001675868

[Vincentas]

user name vygis dongle user

password Do not know



Vdisconnect dongle Wrong username or password !

================================================== ========

Could you try other username? 1 word length. do not forget to press check login after it and write the username you have used.

[Vincentas]

Vincentas,

Followed your instructions,

Got message : Wrong username or password !

Made up user name is : arsenal
Password :sharp55555

My modem details if of help is below
Found modem : MF112
Model : ZTE MF112
IMEI : 864592001675868

What instructions did you follow? Do you have Vygis dongle? These instructions are not for you.
What problem do you have?

[afrik]

No l have a ZTE MF112 dongle.

Also you sent me a reply via my pm to make up user name and passwords when I was getting message of no user name! and error code 63?

[roniri]

Hi!
I have same problem. I got always : Error connecting to server !
I tryd on two pc. Im vygis dongle user, SN: 0001DC70
Please check it, thanks!
Regards Roniri

[afrik]

No l have a ZTE MF112 dongle.

Also you sent me a reply via my pm to make up user name and passwords when I was getting message of no user name! and error code 63?

Modem now unlock.


thanks

[Vincentas]

Hi!
I have same problem. I got always : Error connecting to server !
I tryd on two pc. Im vygis dongle user, SN: 0001DC70
Please check it, thanks!
Regards Roniri

Do not use jtag when use dc-unlocker or will be blocked again. Now have unblocked and you should be able to connect.

[oscar]

DC - Unlocker 2 Client 1.00.0597

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : 19
Model : Huawei U7510/U7517/U7519
IMEI : 356755030695646
Firmware : APP-U7510-sV100R001ESPC86B548-SEC-DEBUG-NOLOG

================================================== =================

Unlocking, please wait ...


access denied !

(error code 17)


access denied !

================================================== =================

access denied !


vygis dongle user ID000255D6


Wait two days, unable to connect to the server
Please help ~ ~

[Vincentas]

DC - Unlocker 2 Client 1.00.0597

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : 19
Model : Huawei U7510/U7517/U7519
IMEI : 356755030695646
Firmware : APP-U7510-sV100R001ESPC86B548-SEC-DEBUG-NOLOG

================================================== =================

Unlocking, please wait ...


access denied !

(error code 17)


access denied !

================================================== =================

access denied !


vygis dongle user ID000255D6


Wait two days, unable to connect to the server
Please help ~ ~

Could you disconnect your dongle, start dc-unlocker software, enter your dongle serial number as username and password 12345 and press check login for one time. What error do you receive?

[oscar]

173Could you disconnect your dongle, start dc-unlocker software, enter your dongle serial number as username and password 12345 and press check login for one time. What error do you receive?

It's password? ? ?
IP address is dynamic!


VYGIS dongle user

[tranchiemtai]

Hi, still can't connect server
I use Riffbox Jtag , I think my dongo block now .
Please help me

DC - Unlocker 2 Client 1.00.0597

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : U8300
Model : Huawei U8300
IMEI : 352397040054573
Firmware : M7x25V100R001C00B257

================================================== =================


Unlocking, please wait ...


Error connecting to server !

(error code 62)


================================================== =================

Vygis dongo : 0000B193

[Vincentas]

173

It's password? ? ?
IP address is dynamic!


VYGIS dongle user

Do you understand me ? Disconnect your dongle, start dc-unlocker software, enter any username and password 12345 and press check login for one time. What error do you receive? What username did you enter?

[Vincentas]

Hi, still can't connect server
I use Riffbox Jtag , I think my dongo block now .
Please help me

DC - Unlocker 2 Client 1.00.0597

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : U8300
Model : Huawei U8300
IMEI : 352397040054573
Firmware : M7x25V100R001C00B257

================================================== =================


Unlocking, please wait ...


Error connecting to server !

(error code 62)


================================================== =================

Vygis dongo : 0000B193

Do not use jtag when use dc-unlocker or will be blocked again. Now have unblocked and you should be able to connect. If will use it again, will be blocked again. Next time may not be able to unblock you.

[oscar]

Do you understand me ? Disconnect your dongle, start dc-unlocker software, enter any username and password 12345 and press check login for one time. What error do you receive? What username did you enter?




User name
Vygisdongleuser
Psssword
12345
Check login
Is the following error

Wrong username or password!

[Vincentas]

User name
Vygisdongleuser
Psssword
12345
Check login
Is the following error

Wrong username or password!

Could you try to do unlock with dongle now? Now everything should be ok.

[oscar]

Could you try to do unlock with dongle now? Now everything should be ok.

Can,
Thanks for your help



User : 000255D6
Password : OK !
Credits left : 0

[usmanrana]

HI Please Help
I have Vygis activation for Dc unlocker
Dongle ID: 0000B165
Any Phone i am tryign to do it says Cnt connect to server error 62,, please help
loosing BUsinesss


Regards

[fmasini]

I have the same problem:
--------------------------------------------------------------

DC - Unlocker 2 Client 1.00.0597

Detecting phone :

selection :
manufacturer - ZTE phones
model - ZTE F107

Model : ZTE F107
IMEI : 358048030109513
Firmware : H3G_GB_P607C5V1.0.0B010-S
Compile date / time : Mar 12 2010 17:58:32
Chipset : Qualcomm QSC6240
User Lock Code : 0000

================================================== =================

Unlocking, please wait ...


Error connecting to server !

(error code 62)


I had the monitoring software on but not now, please unblock me (usr: fmasini)

Thanks in advance

[Vincentas]

HI Please Help
I have Vygis activation for Dc unlocker
Dongle ID: 0000B165
Any Phone i am tryign to do it says Cnt connect to server error 62,, please help
loosing BUsinesss


Regards

Contact us by live chat on Monday. Working hours from 11 to 19 gmt+2.

[Vincentas]

I have the same problem:
--------------------------------------------------------------

DC - Unlocker 2 Client 1.00.0597

Detecting phone :

selection :
manufacturer - ZTE phones
model - ZTE F107

Model : ZTE F107
IMEI : 358048030109513
Firmware : H3G_GB_P607C5V1.0.0B010-S
Compile date / time : Mar 12 2010 17:58:32
Chipset : Qualcomm QSC6240
User Lock Code : 0000

================================================== =================

Unlocking, please wait ...


Error connecting to server !

(error code 62)


I had the monitoring software on but not now, please unblock me (usr: fmasini)

Thanks in advance

Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server.

[fortunecomms]

Unlocking, please wait ...


Error connecting to server !

(error code 62)

Vygis dongle user ID 0001DC2C AND 0001B0BE

I had promblem with one machine saying network scanner found... there is no antivirus or such software on that machine only xp pro and office.

now both machines cannot connect to server.

please help

[Vincentas]

Unlocking, please wait ...


Error connecting to server !

(error code 62)

Vygis dongle user ID 0001DC2C AND 0001B0BE

I had promblem with one machine saying network scanner found... there is no antivirus or such software on that machine only xp pro and office.

now both machines cannot connect to server.

please help

Uninstall network scanner software and it drivers (winpcap driver) or will be blocked again. Now have unblocked and you should be able to connect to server.

[fortunecomms]

how do i find "network scanner" as i said the computer only has xp pro and office installed?

[Vincentas]

how do i find "network scanner" as i said the computer only has xp pro and office installed?

WinPcap is used as the network interface by many tools -- both free and commercial including protocol analyzers, network monitors, network intrusion detection systems, sniffers, traffic generators, network testers, etc. Some of these tools, like Wireshark, Nmap, Snort, WinDump, ntop are very well known in the networking community.

The driver can be started or stopped from Services in the Control Panel or by other programs. The program has no visible window. The service has no detailed description. The file is not a Windows core file. There is no file information. Program is not active.

[PhươngAnh™]

Hi!
I have same problem.
=============================
Unlocking, please wait ...

Error connecting to server !

(error code 17)
=============================

My Dongle id : 11888F5E .
Please help me ! Thanks in advance .

[Vincentas]

Hi!
I have same problem.
=============================
Unlocking, please wait ...

Error connecting to server !

(error code 17)
=============================

My Dongle id : 11888F5E .
Please help me ! Thanks in advance .

You are blocked for using usb sharing. It is not allowed. Contact us by live chat on Monday. Working hours from 11 to 19 gmt+2 and we will check more if you can be unblocked.

[PhươngAnh™]

You are blocked for using usb sharing. It is not allowed. Contact us by live chat on Monday. Working hours from 11 to 19 gmt+2 and we will check more if you can be unblocked.

Thank you very much Vincentas ! :D

[muhadtg]

DC - Unlocker 2 Client 1.00.0597

Detecting card :

selection :
manufacturer - ZTE modems
model - Auto detect (recommended)

Found modem : MF626
Model : ZTE MF626
IMEI : 359672022503505
Firmware : BD_P673M3V1.0.2B03
Compile date / time : Dec 10 2008 17:34:12
Chipset : Qualcomm MSM6246
NAND Flash : SAMSUNG_K9F1208
SIM Lock status : Locked (Card Lock)

================================================== =================

Error connecting to server !

================================================== =================

Unlocking, please wait ...


access denied !

(error code 17)


================================================== =================

please help me

my username: muhadtg

thx before

[Vincentas]

DC - Unlocker 2 Client 1.00.0597

Detecting card :

selection :
manufacturer - ZTE modems
model - Auto detect (recommended)

Found modem : MF626
Model : ZTE MF626
IMEI : 359672022503505
Firmware : BD_P673M3V1.0.2B03
Compile date / time : Dec 10 2008 17:34:12
Chipset : Qualcomm MSM6246
NAND Flash : SAMSUNG_K9F1208
SIM Lock status : Locked (Card Lock)

================================================== =================

Error connecting to server !

================================================== =================

Unlocking, please wait ...


access denied !

(error code 17)


================================================== =================

please help me

my username: muhadtg

thx before

We do not have such username. Did you buy credits?

[egizog1]

Hi i cant connect to server. Help me
My user name egizog1

DC - Unlocker 2 Client 1.00.0597

Detecting card :

selection :
manufacturer - ZTE modems
model - Auto detect (recommended)

Found modem : MF112
Model : ZTE MF112
IMEI : 359046030786180
Firmware : BD_P671A2V1.0.2B05
Compile date / time : Mar 10 2010 14:29:52
Chipset : Qualcomm MSM6290
SIM Lock status : Locked (Card Lock)

[Vincentas]

Hi i cant connect to server. Help me
My user name egizog1

DC - Unlocker 2 Client 1.00.0597

Detecting card :

selection :
manufacturer - ZTE modems
model - Auto detect (recommended)

Found modem : MF112
Model : ZTE MF112
IMEI : 359046030786180
Firmware : BD_P671A2V1.0.2B05
Compile date / time : Mar 10 2010 14:29:52
Chipset : Qualcomm MSM6290
SIM Lock status : Locked (Card Lock)

We do not have such username. Did you buy credits? Username and pasword to use software you will receive after buy credits.